The table below is a list of the AutoCAD commands that are integrated with ProjectWise. Commands followed with "*" are available ONLY in the ProjectWise 8.9.2 or later releases, "**" indicates commands available in the 8.9.3 or later releases ONLY.
These commands are supported on all versions of AutoCAD where the command is recognized.
| Integrated Command |
Command Description |
| DMSNEW |
Creates new document. |
| DMSOPEN |
Opens document from ProjectWise. |
| DMSQSAVE, DMSSAVE |
Saves current document. |
| DMSSAVEAS |
Saves current document as new document. |
| DMSQUIT |
Closes AutoCAD and all opened documents. |
| DMSINSERT |
Inserts block from ProjectWise into a drawing. |
| DMSWBLOCK |
Saves block to file in ProjectWise. |
| DMSEXPORT |
Exports document to DMS. |
| DMSFILEOPEN |
Opens document from ProjectWise by ODMA ID. |
| DMSXREF |
Inserts external reference. |
| REFEDIT ** |
Edits attached external references and blocks. |
| XOPEN ** |
Opens the selected external reference for editing (Checked out of PW). |
| PLOT ** |
Plot active file directly into ProjectWise. |
| DMSPROPERTIES |
Shows dialog with DMS properties. |
| DMSIMAGE |
Inserts image to drawing. |
| DMSOFF |
Disables ProjectWise integration. |
| DMSON |
Enables ProjectWise integration. |
| DMSTB |
Initializes titleblock support. |
| DMSINIT |
Initializes ProjectWise integration (generally is executed automatically). |
| DMSREFRELOAD |
Reloads references that are out of date. |
| DMSREFCHECK |
Checks to see if references are out of date and prompts to reload them. |
| DMSSET, DMSSETVAR |
Sets a ProjectWise integration variable. |
| DMSFILEINIT |
Initializes integration from a file which is opened by another application. |
| DMSPROFILESET * |
Sets AutoCAD profile. |
| DMSINSERTREADLINE |
Inserts redline document. |
| TBUPDATE |
Updates titleblocks in drawing with the data in ProjectWise. |
| TBUPDATEDMS |
Updates data in ProjectWise with the content of the titleblocks in drawing. |
| TBINSERT |
Inserts titleblock in the drawing. |
| TBUPDATEONOPEN |
Performs titleblock update on document open. |
| TBAUTOUPDATE |
Updates titleblocks in the drawing, based on titleblock data in ProjectWise (used by the Attribute Bulk Update tool). |
| TBAUTOUPDATEDMS |
Updates data in ProjectWise with the content of the titleblocks in the drawing (used by the Attribute Bulk Update tool). |