Search

Bentley MX Hardware and System Requirements

Support

<< Return to Index
Subject: Bentley MX Hardware and System Requirements
Product: Bentley MX Products
Document Number: 8283

Hardware and System Requirements

The recommended requirements for MX Version 2.6 running under Windows NT, Windows 2000 or Windows XP are listed in the table below.

The requirements for the three MX environments are shown under the appropriate heading - Windows, AutoCAD and MicroStation.

Minimum values are shown in square brackets.

If you intend to make use of Multiple Document feature in AutoCAD 2000 you may require a significantly larger amount of memory and larger disk paging file than the numbers quoted.

If MX is to be installed on a network drive, or project folders are to be created on a network drive, the drive must be capable of supporting long file names.

Installing this version of MX will install Microsoft Data Access Components (MDAC) version 2.5 SP1 (unless a later version already exists on your PC)

Hardware Requirements

Item Windows AutoCAD MicroStation
Processor Pentium PIII 900MHz or equivalent
[Pentium 500]
Same as Windows Same as Windows
Operating system Windows 2000 SP2
Windows XP
Windows NT 4.0 SP6a
[Windows NT 4.0 SP4]
Same as Windows Same as Windows
Memory 256 MB
[128 MB]
[256 MB] [256 MB]
Graphics Card 32MB 3D accelerated
Open GL
[2MB VRAM]
Same as Windows Same as Windows
Graphics Monitor 19 inch
[17 inch]
Same as Windows Same as Windows
Hard Disk Type UDMA 100 (check for motherboard compatibility)
[5,400rpm]
Same as Windows Same as Windows
Network Card (optional) 100 Mbit
[10 Mbit]
Same as Windows Same as Windows
CD ROM Any Same as Windows Same as Windows

System Requirements

Item Windows AutoCAD MicroStation
CAD Release   AutoCAD 2000
AutoCAD 2000I
AutoCAD 2002
(includes equivalent MAP and Land Desktop versions)
MicroStation V8
Disk Space Paging File 500MB initial, 500MB max unfragmented
[300MB initial, 300MB max]
Same as Windows Same as Windows
Disk Space 225 MB program files
40 MB help files
+7MB +7MB
Minimum free disk space required before installation in temp folder 100 MB Same as Windows Same as Windows
Minimum free disk space required after installation (excluding data) 50 MB Same as Windows Same as Windows
Display Settings Desktop area
1024 x 768

Color palette
65536 colors

Font size
Small fonts
Same as Windows Same as Windows
Graphics Software HOOPs 6.1 (bundled) Included in AutoCAD Included in MicroStation
Networking (optional) Novell Netware 3.12, 4.1,4.11, 5 Same as Windows Same as Windows
Network installation TCP/IP protocol (default)    


How useful was this page?
less
  more
Suggest new content or let us know how we can improve this content (optional):

<< E-mail this page